7.2V Ni-mh battery charger SAA 6s cell 9V1A Item No.: IN0901000   Features/ Functions 7.2V Ni-mh battery charger for 6 series cell Automatic detection of shorted/ bad battery or battery inversed input LED indicate the charge status   Comply to MEPS  Safety standard approvals: SAA, CB, C-tick      General Specifications Input :100-240VAC, 50/60Hz Output voltage : 4.8~9VDC Output current : 1A Inrush current : Limited 15A for a cold start No load standby power ≤0.5W Efficiency: 75% Min Dielectric withstand test: 5mA300VAC for 2 seconds Temperature: Case 65 ℃ Max. Operating temperature: -29℃ ～+45.5℃ Storage temperature: -40℃ ～+75℃ Operating relative humidity: 5%～95% RH Over load protection: Auto recovery Short circuit protection: Auto recovery MTBF: 30000 hours full rated load operation at 25℃ AQL: MIL-STD-105D II CRI 0; MAJ 0.25; MIN 2.5 FL5, No.62, Liusha S. RD., Shijie,Dongguan, Guangdong 523303 China 广东省东莞市石碣镇刘沙南路62号5层 Tel：+86(0)769-81812289 Fax：+86(0)769-81812989 E-mail: william@intaia.com Website: Http://www.intaia.com