18V 0.4A charger for Nickel Metal Hydride battery
Item No.: IN1800400
  Features/ Functions
  • MCU controls the whole charge process
  • For 13.2 Volts (11xAA cells) NiMh battery
  • Automatic detection of shorted/ bad battery
  • Constant charging current
  • With a build-in timer
  • 3 termination methods

    - Charge is terminated when voltage drop (-dV/dt) is detected.
    - Charge is terminated when the voltage rises above 16.5V.  
    - Charge is terminated when the timer is up to 5 hours.  

  • LED indicator for showing charger status
  • With IEC C8 mians connector
  • Safety standard approvals: UL, CUL, CE, PSE, RCM. CB, FCC
  •   
      General Specifications
    • Input :100-240VAC, 50/60Hz
    • Output voltage : 8.25 ~16.5VDC
    • Output current : 0.4A +/-0.1A 
    • Inrush current : Limited 15A for a cold start
    • No load standby power ≤0.5W
    • Efficiency: 60% Min.
    • Operating temperature: -29℃~+45.5℃
    • Storage temperature: -40℃~+75℃
    • Operating relative humidity: 5%~95% RH
    • Over load protection: Auto recovery
    • Short circuit protection: Auto recovery
    • MTBF: 30000 hours full rated load operation at 35℃
    • Inspection: MIL-STD-105D II AQL:CRI 0; MAJ 0.25; MIN 2.5
    • Warranty: 3 year






    FL5, No.62, Liusha S. RD., Shijie,Dongguan, Guangdong 523303 China 广东省东莞市石碣镇刘沙南路62号5层
    Tel:+86(0)769-81812289 Fax:+86(0)769-81812989 E-mail: william@intaia.com Website: Http://www.intaia.com