Dongguan Intai Power Supply Co., Ltd carries a wide selection of quality lithium iron phosphate battery chargers feature fully automatic- starts, stops and charging automatically, LFP charge algorithm controls both voltage and current for precise charging. The IN4403000 is a highly optimized lithium phosphate battery charger for 12 cell pack. The 43.2V 3A lithium iron battery charger has UL/cUL/GS/CE/PSE/RCM rating and comes with high reliability and long lifespan.

Buy this quality replacement electric skateboard charger for Onewheel self-balancing electric skateboard with 48V 16S LiFePO4 battery. The 58.4V onewheel battery charger is equipped with a female XLR plug and suited for Onewheel Original and Onewheel+. This high power lifepo4 battery charger employs modern LFP charge algorithms to enable accurate and safe charging, runs at 2.2A until the battery voltage reaches 58.4V, then holds for float charging and shuts off the output when cells are fully charged so that the scooter battery charger can be left connected for long periods. The onewheel charger is compact, durable and compatible with the original. The IN5802200 58.4V battery charger for electric scooters is UL/cUL 1012 listed and comes with excellent EMC performance and 3 year warranty.

The 48V LiFePO4 battery charger IN5802200 works great with 16S LiFePo4 batteries 48 volt pack of size 6AH or larger. It is designed with advanced charging algorithms to achieve high operating efficiency and the durable, reliable performance. The 58.4V LiFePo4 battery charger is a UL1012 listed battery charger that incorporates protective electronics that automatically shut down the charger to prevent overcharging or fire hazard when fault occurs.

Intai's 12V batery charger family consists of multi-chemistry Li-Ion/Polymer, LiFePO4, or Lead-Acid battery charger with termination. The 12V battery chargers come with optimized design for precision regulation, high efficiency, green mode stand by power consumption, good EMC performance, reduced volume and lower power dissipation. In order to maximize the performance of both the batteries and chargers, it is important to select the appropriate charging algorithms based on the battery manufacturer's specified voltage and current thresholds and temperature characteristics. This 12V lifepo4 battery charger 14.6V 3A is configured for fast, accurate charging, to give optimum battery life and reliability for a 4S pack.

The IN2903000 24V 3 amp battery charger delivers 18~29.2V regulated charging voltage for 8 cell 24V pack. The 29.2V battery charger is a fully intelligent battery charger which communicates with the LiFePO4 battery to monitor cell voltage and charge status to optimize the performance and extend the life of the battery. The 29.2V charger is equipped with protective electronics that automatically shut down the charger when cells are fully charged or in case any faulty occurs. With the BFP protection, the 24V LiFePO4 charger is capable of preventing backflow of current into the charger from the battery. The following symptoms are incurred if the red light continuously flashes: - The battery voltage is detected too low the charging will not be commenced. - Reverse polarity connected or short circuited.

The LiFePO4 battery charger 14.6V 5A quickly charges 4S cell lithium iron phosphate 12V pack, delivers the durable, reliable performance you need, providing a low-cost and high accuracy voltage regulation solution with full protection and charge status indication. The LiFePO4 smart charger effectively protects against over heat, fire hazards and electric shock. The IN1505000 14.6V LiFePO4 battery charger has been certified to the safety standards including UL/cUL1310 Class 2 Battery Charger, TUV/EN60335-2-29 and AS/NZS60335-2-29 Household and similar electrical appliances - Particular requirements for battery chargers. The 14.6V battery charger series is also compliant to EN 55014-B and FCC Class B for radiated and conducted emissions and the IEC 61000-4 immunity and IEC 61000-3-2 harmonic current standards.

Intai LiFePO4 charger 12V is designed to be used with 4 cells Lifepo4 battery pack of size 12AH or larger. The 4A battery charger 12V has been certified to the safety standards including UL1310 Class 2 Battery Charger, TUV/EN60335-1/ 2-29 and AS/NZS60335-1/ 2-29 Household and similar electrical appliances - Particular requirements for battery chargers. The 12V lifepo4 lithium battery charger effectively protects the batteries from overhearing, fire and explosion. The LFP charger is microprocessor controlled which can also be custom-made to suit your own requirements.

The 24V lifepo4 battery charger 2A operates from a universal input 90 to 264Vac and incorporates several safety features including automatic cut off when the cells are fully charged. This 24V smart charger effectively protects against overhearing, fire and electric shock. The 24V 2A 8S battery charger lifepo4 has been tested to meet UL 1310 and EN/RCM 60335-2-29 standards. The lifepo4 8S charger is also compliant to EN 55014-B and FCC Class B for radiated and conducted emissions and the IEC 61000-4 immunity and IEC 61000-3-2 harmonic current standards.