Search Products Please input Output Voltage : VDC Output Current : mA Products Battery Chargers Li-ion battery chargers Ni-mh battery chargers Wheelchair charger Lead-Acid battery chargers Car charger LiFePO4 battery chargers AC Power Adapters Wall plug-in type Desktop type USB type Links

More Than 1000 Modles Are Available SAA C-tick RCM certified Li-ion charger 16.8V 2A 36V electric bike battery charger UL1310 certified Wheelchair battery charger 29.4V2A ISO7176-25 UL CE RCM battery charger anti reverse connection UL1310 certified 29.4V2A lead acid battery charger EN60335 battery charger 29.4V4.2A for skateboard UL1012 certified battery charger 42V 3A 36V segway electric scooter battery charger UL1310 certified 42V 2A li-ion battery charger 24V li-ion Battery Charger 29.4V 2A MCU charger 15V 0.3A for 1100mAH NiMh battery Battery charger for 12V single Lead acid cell EN60335-2-29 certified battery charger 25.2V2A EN60335 charger 16.8V3A for 4S Lithium ion battery E-bike single Lead acid battery 12V charger LED power transformer 29V0.3A SAA MCU aaa battery charger 21V 1A 15 series cell LED power supply 24V3A More>> What to make Ni-MH battery chargers different? The charging of a battery is made possible by a reversible chemical reaction that restores energy in a chemical system. Depending on the chemicals used, the battery will have certain characteristics. For a Li-ion battery or Lead acid battery charger, the basic algorithm is to charge at constant current until the charge current has dropped to a lower limit then termination is triggered. Unlike Li-ion or Lead acid battery, when a Ni-MH battery is charged, there is no significant change in charging current when the battery is fully charged. Instead, it’s voltage begins to drop. On the other hands, Ni-MH batteries are damaged from overcharging... More>> Briefing On Differences Between Power Adapters And Battery Chargers Ln Terms Of Safety Standards Reverse Polarity Protection:For A Device Intended For Charging Batteries And Provided With Nonpolarized Output Connections,The External Output Leads Are To Be Connected In Revese Polarity To A Fully Charged Battery Intended For Theapplication. The Unit Is Then To De Connected To Its Maximum Test Voltage,And Operated Nutil The Ultimatecondition Is Observed,Or 4 Hours If Cycling Of An Autimatically Reset Protector Occurs. A Battery Charger Should Be Equipped With A Protectoin Device To Prevent The Battery From Flowing Back(Backfeed)... More>>

HOME　|　About　|　Products　|　Model list　|　Certifications　|　Contact Us　|　FAQ　|　Website management　|　Map

网站备案：粤ICP备09105952号