The 8.4v nimh charger is a sophisticated smart battery charger which works with 7-cell 1100mAH nickel metal hydride battery pack. The charger is microprocessor based, modern algorithm is used to enable accurate charging. The 8.4v 7-cell nimh battery charger combines three terminating triggers to prevent over-charging and optimize the performance and life of batteries: -dV, preset time out and maximum voltage of 1.5/cell. As a professional battery charger manufacturer for more than 10 years, together our expertise in NiMH charging management, we are in good position to supply variety of cost-effective NiMH battery chargers with high levels of performance to our customers all over the world.

The IN1500300 12V NiMH battery charger comes with negative delta V detection, bad cell detection, and equipped with built-in timer, short circuit and reverse polarity protection. This 12 volt battery charger is a compact, accurate, automatic multistage charger works with 10S 12V NiMH rechargeable battery pack. The 12V NiMH charger runs at a soft charging of a 300-mA rate to preserve capacity and will automatically terminate the charge when it detects -dV.

The 7.2V nimh battery pack charger is designed to be used with battery pack of size around 2200mAH at 9V regulated charging voltage. The battery charger aa aaa 9V is a sophisticated compact external smart charger that enables accurate monitoring and charging, employing a software controlled algorithm to optimize battery performance. The nimh 9V battery charger detects charge states by utilizing Negative Delta V detection and pulse charging and cuts off current when batteries are full. The 9V nimh battery charger is equipped with interchangeable plugs to be used all around the world.

The 6V nimh charger is designed to charge a 2500mA 4 AA cell pack. The cell charger features automatically cut-off by negative delta V when battery pack attains full charge, with a built-in safety timer of 3.5H, charging terminated when battery voltage reach 6.1V threshold, accurate voltage measurements by using of pulse technique, compact, high efficient and low cost, LED indicate the charge status. The 6V nimh battery charger is backed by a 3 year warranty.

Smart MCU controlled 9.6V battery charger is available for 8S ni-mh battery packs with capacity around 1200mAH. The 9.6V nimh charger automatically cuts-off by negative delta V when battery packs get fully charged, and backed up with safety time to prevent over charge. The charger for 9.6V nimh battery will be running at 500 mA of current for fast but safe charging. As one of our best-selling products for years, the 9.6 volt nimh battery charger has been proved to be of super quality with zero complaint rate from the market.

The intelligent nimh battery charger for nimh battery pack 24V combines four main methods of end of charge detection. ●Negative delta V detection ●Bad cell detection ●Safety timer ●Maximum battery voltage The smart nimh battery charger is protected against short circuit and reverse polarity. Impulse technique is applied for accurate voltage measurements. With our technical support and strong R&D capacity, we are able to offer 24V nimh nicd battery chargers that meet various Nimh charge demands in the market.

The charger for 4.8V battery pack of Nickel metal hydride battery combines all of the features neccessary to assure long battery life with repaid charging capability. The 4.8V nimh battery charger provides accurate charging to enable optimal battery performance. Charging current is terminated before 100% capacity by negative delta V. Benefiting from the design of a compact, light weight, high performance 4.8V battery charger for flashlight, a cost effective system can be built with flexibility. The 4.8V nimh battery pack charger is covered by a 3 year warranty.

The 3.6V NiMH AAA battery charger makes full use of modern algorithms to ensure high levels of performance and achieve a cost effective NiMH charging solution. The 3.6V battery charger AAA is designed to prevent overcharging by Negative Delta V detection and pulse charging and cut off current when batteries are full. Running at 600 mA of current for fast and safe charging a 3.6V NiMH battery pack, the 3.6V NiMH battery charger not only quickly charges the batteries, and to optimize the life of them.

The IN2902000 24V 2 amp battery charger is designed for 2S SLA cell. The 24vdc battery charger maximizes battery life and performance by accurate charging. Features: No sparks, short-circuit proof, backflow protection and reverse-polarity protected. Lead Acid charge algorithms are similar to Li-Ion and LiFePO4 but not totally the same. Intai offers different versions of 24V 2A charger for Lead Acid and Lithium chemistries. The 24 volt battery charger measures 132x58x31mm and comes with IEC320 C5 AC power inlet.

This UL/cUL, CE, RCM approved 12 volt SLA battery charger is equipped with modern charging algorithm includes several stages for optimizing battery performance and safety. The 12V sealed lead acid battery charger incorporates a built-in relay to prevent the battery from flowing back. As a choice, another version of 12V SLA battery charger using different charging algorithms is also available, which goes into float mode when the charging cycle is complete. As one of professional battery charger manufacturers in China, Intai is in a good position to provide customers with charging solutions and products of superior quality with a full line of automatic sla battery charger ranged from 5W- 500W and the expertise needed to help you with your project to achieve cost effective system.

The IN2904200 24 volt wheelchair battery charger is particularly suited for mobility applications like wheelchairs or scooters that use the standard 3 pin XLR connector. The electric scooter charger 24 volt is EN 60335-2-29 certified and ISO 7176-25 compliant. It incorporates a built-in safety timer to shut off in any case 12 hours after charging commences, and a power-on indicator in addition to the charge status indicator. While with excellent performance, the charger is an ideal replacement for 24 volt battery charger scooter and 24V power chair charger 24V DC 5A at lower cost.

You can expect this compact high power lead acid battery charger 24V 5A delivers the durable, reliable performance you need. Featuring a XLR connector port, it is compatible with many electrically powered wheelchair and mobility scooter with 24 volt lead acid battery sized from 16 to 40AH. The 24V 5A charger is universal input, accepting input voltage between 100 and 240Vac, making it ideal for world wide use or travel. Automatic shut-off protects the battery pack from being over charged. With a built-in 12 hours timer as a back up for safe charging, the 24v 5a battery charger is not only UL/CUL/CE/RCM certified, it also complies with the recommendations in the industry such as ISO 7176-25.