The 73.5V heavy duty battery charger is designed for 60V Lead acid batteries that charges at 5 amps current density, accepting a world wide AC input 90-264Vac. The 60V lead acid battery charger is built with aluminum housing and high quality fan runs quiet and are reliable for efficient heat dissipation. This 60V battery charger also features high efficiency, low noise, intelligent with advanced charging algorithm. The 60 volt lead acid battery charger works great with 5 cell SLA pack for heavy duty electric vehicles, electric tricycle, electric forklift, electric bicycles...you can expect a powerful and durable performance delivered by the lead acid battery charger 60V 5A.

Intai IN5802200 130W 48V lead acid battery charger, a highly efficient, reliable, compact, high power density, smart 48vdc battery charger which incorporates multi steps in the charging cycle provides safe and accurate charge performance. The 48V battery charger lead acid features bad cell detection, pre-charge, full protection against faulty conditions, auto shut off when charge is complete.

The battery chargers automotive 6 and 12 volt is easy to use, safe and cost efficient which is designed to charge motorcycles, cars, boats, RVs, tractors and equipment that are not used for some time that equipped with 6V and 12V Lead Acid batteries. The battery charger 6 12V automatically identifies the battery voltage 6V or 12V and adjusts itself to correct charging voltage/current needs so it does not need to manually switch between 6V and 12V. The 6 12v battery charger is based on standard Lead-Acid charge algorithms: 3 stage with constant current, constant voltage and drops to a float charge when the battery is full, that enables the 6 12 volt battery charger left connected for long periods of time without the worry of overcharging the battery. While alligator clips connectors make it easy to adapt to different styles of battery posts, you do not have to worry about mis-operation because the car battery charger 6/12v protects against short-circuit, reverse connection, and other faulty conditions with auto recovery. The car battery charger 6V/12V is available for US, EU, AU, UK, JP plug head version.

Dongguan Intai Power Supply Co., Ltd carries a wide selection of quality lithium iron phosphate battery chargers feature fully automatic- starts, stops and charging automatically, LFP charge algorithm controls both voltage and current for precise charging. The IN4403000 is a highly optimized lithium phosphate battery charger for 12 cell pack. The 43.2V 3A lithium iron battery charger has UL/cUL/GS/CE/PSE/RCM rating and comes with high reliability and long lifespan.

Buy this quality replacement electric skateboard charger for Onewheel self-balancing electric skateboard with 48V 16S LiFePO4 battery. The 58.4V onewheel battery charger is equipped with a female XLR plug and suited for Onewheel Original and Onewheel+. This high power lifepo4 battery charger employs modern LFP charge algorithms to enable accurate and safe charging, runs at 2.2A until the battery voltage reaches 58.4V, then holds for float charging and shuts off the output when cells are fully charged so that the scooter battery charger can be left connected for long periods. The onewheel charger is compact, durable and compatible with the original. The IN5802200 58.4V battery charger for electric scooters is UL/cUL 1012 listed and comes with excellent EMC performance and 3 year warranty.

The 48V LiFePO4 battery charger IN5802200 works great with 16S LiFePo4 batteries 48 volt pack of size 6AH or larger. It is designed with advanced charging algorithms to achieve high operating efficiency and the durable, reliable performance. The 58.4V LiFePo4 battery charger is a UL1012 listed battery charger that incorporates protective electronics that automatically shut down the charger to prevent overcharging or fire hazard when fault occurs.

Intai's 12V batery charger family consists of multi-chemistry Li-Ion/Polymer, LiFePO4, or Lead-Acid battery charger with termination. The 12V battery chargers come with optimized design for precision regulation, high efficiency, green mode stand by power consumption, good EMC performance, reduced volume and lower power dissipation. In order to maximize the performance of both the batteries and chargers, it is important to select the appropriate charging algorithms based on the battery manufacturer's specified voltage and current thresholds and temperature characteristics. This 12V lifepo4 battery charger 14.6V 3A is configured for fast, accurate charging, to give optimum battery life and reliability for a 4S pack.

The IN2903000 24V 3 amp battery charger delivers 18~29.2V regulated charging voltage for 8 cell 24V pack. The 29.2V battery charger is a fully intelligent battery charger which communicates with the LiFePO4 battery to monitor cell voltage and charge status to optimize the performance and extend the life of the battery. The 29.2V charger is equipped with protective electronics that automatically shut down the charger when cells are fully charged or in case any faulty occurs. With the BFP protection, the 24V LiFePO4 charger is capable of preventing backflow of current into the charger from the battery. The following symptoms are incurred if the red light continuously flashes: - The battery voltage is detected too low the charging will not be commenced. - Reverse polarity connected or short circuited.

The LiFePO4 battery charger 14.6V 5A quickly charges 4S cell lithium iron phosphate 12V pack, delivers the durable, reliable performance you need, providing a low-cost and high accuracy voltage regulation solution with full protection and charge status indication. The LiFePO4 smart charger effectively protects against over heat, fire hazards and electric shock. The IN1505000 14.6V LiFePO4 battery charger has been certified to the safety standards including UL/cUL1310 Class 2 Battery Charger, TUV/EN60335-2-29 and AS/NZS60335-2-29 Household and similar electrical appliances - Particular requirements for battery chargers. The 14.6V battery charger series is also compliant to EN 55014-B and FCC Class B for radiated and conducted emissions and the IEC 61000-4 immunity and IEC 61000-3-2 harmonic current standards.

Intai LiFePO4 charger 12V is designed to be used with 4 cells Lifepo4 battery pack of size 12AH or larger. The 4A battery charger 12V has been certified to the safety standards including UL1310 Class 2 Battery Charger, TUV/EN60335-1/ 2-29 and AS/NZS60335-1/ 2-29 Household and similar electrical appliances - Particular requirements for battery chargers. The 12V lifepo4 lithium battery charger effectively protects the batteries from overhearing, fire and explosion. The LFP charger is microprocessor controlled which can also be custom-made to suit your own requirements.

The 24V lifepo4 battery charger 2A operates from a universal input 90 to 264Vac and incorporates several safety features including automatic cut off when the cells are fully charged. This 24V smart charger effectively protects against overhearing, fire and electric shock. The 24V 2A 8S battery charger lifepo4 has been tested to meet UL 1310 and EN/RCM 60335-2-29 standards. The lifepo4 8S charger is also compliant to EN 55014-B and FCC Class B for radiated and conducted emissions and the IEC 61000-4 immunity and IEC 61000-3-2 harmonic current standards.

This 48V 2.5A switching power adapter is built with the latest power supply technologies and the quality components materials to enable high performance. High-frequency AC-to-DC flyback converter with green-mode power-saving operation enables high power density and lowest no-load power consumption, to comply with global efficiency standards including DoE Level VI and EU CoC V5 Tier-2. The 48V 2.5A power adapter features full protection to maximize the reliability. These features include OLP(Over Load Protection), OVP(Over Voltage Protection), output short-circuit protection. The 48V power adapter incorporates a pair of U shaped internal heat sinks to achieve efficient natural convection cooling to enable higher operating temperatures and reliability. The 48 volt power adapter series is safety certified to IEC/UL/EN 60950-1 and carries the CE mark for the Low Voltage and RoHS Directives. The 48V adapter series is also compliant to EN 55022-B and FCC Class B for radiated and conducted emissions and the IEC 61000-4 immunity and IEC 61000-3-2 harmonic current standards.